Close Dialog

Send a Wave 👋

To: Craig Wiermaa

Close Dialog

Sending a Wave is reserved for LSC Employees who are listed in the Staff Directory.

Please sign-in to send a Wave to Craig.
Sign-In

Close Dialog

Send a Wave 👋

To: Craig Wiermaa

Close Dialog

Sending a Wave is reserved for LSC Employees who are listed in the Staff Directory.

Please sign-in to send a Wave to Craig.
Sign-In

LSC Faculty/Staff Directory

Craig Wiermaa

Faculty Department/Office: Business And Industry

Wave 👋

Send a “wave” to a Craig to show you appreciate them in general or because of a specific occurrence.

+ Send a Wave

Wave 👋

Send a “wave” to a Craig to show you appreciate them in general or because of a specific occurrence.

+ Send a Wave

Craig's courses at LSC

Subject
Course Number
Title/Description
Subject: ELTN
Course Number: 1406
DC Electricity This course covers essential entry-level topics in DC electricity, electronic devices, and associated circuit analysis techniques. The lab portion of this course teaches the use of electronic test equipment to test components and measure circuit values to determine performance. In doing so, the student will verify the laws and theorems presented in the lectures. (Prerequisites: MATH 0950/0955 and college-level reading) (2.5 hrs lec/3 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1408
AC Electricity This course covers essential entry-level topics in AC electricity, electronic devices, and associated circuit analysis techniques. The lab portion of this course teaches the use of electronic test equipment to test components and measure circuit values to determine performance. In doing so, the student will verify the laws and theorems presented in the lectures. (Prerequisites: ELTN 1406) (2.5 hrs lec/3 hrs lab/0 hrs OJT).
Subject: ELTN
Course Number: 1412
Digital Electronics In this course the student will study basic logic gates and flip-flops and learn to use them in simple digital circuits. Number systems used in digital electronics will be studied. Truth tables and Boolean algebra will be used to analyze, design, and manipulate digital logic circuits. In the lab, students will learn to build digital circuits which will serve to reinforce the material covered in lecture. (Prerequisites: None) (1 hr lec/2 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1422
Media and Cabling In this course, the student will learn various wiring strategies using various types of cables and connectors. The student will learn to run and terminate cables in accordance with industry standards and will learn to use cable testing equipment to troubleshoot faulty installations. (Prerequisite: None) (1 hr lec/2 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1432
Solid-State Devices This course covers the theory and operation of basic solid-state devices including various types of diodes, transistors, thyristors, and linear integrated circuits. The student then learns how these devices are used in simple circuits such as power supplies, amplifiers, and switching circuits. In the lab portion of this course, the student will build and observe the operation of various circuits studied in lecture. (Prerequisites: ELTN 1408) (2 hrs lec/4 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1442
Motors and Generators This course covers the basic construction, operation, and control of DC, single, and three phase motors and generators. In the lab portion of this course the student will investigate the operation of various types of motors and generators reinforcing the lecture material. (Prerequisite: ELTN 1408) (3 hrs lec/6 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1470
Systematic Troubleshooting This course provides the student with a systematic, rational approach to analyze problems and avoid future problems. (Prerequisites: ELTN 1406) (1 hr lec/0 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 1480
Fluid Power On completion of this course the student will understand the basic laws of physics as they apply to fluid power, as well as understand schematics and basic system design. The student will also study the various components found in typical pneumatic and hydraulic systems and how these components function and interact with each other. (Prerequisites: ELTN 1408) (2 hrs lec/2 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 2400
CET Exam Preparation This course prepares the student for the Certified Electronics Technician examination. This nationally recognized certification exam covers a wide range of electronic theory and applications. (Prerequisites: ELTN 1432) (2 hrs lec/0 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 2430
Introduction to Instrumentation This course covers instrumentation concepts including theory of instrumentation loops, common symbols, acronyms, input/output devices, controllers, and troubleshooting. (Prerequisites: ELTN1408) (1 hr lec/4 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 2440
Motor Speed Controllers This course covers the basic methods of DC, AC, magnetic, and mechanical speed control. Installation and testing methods will be practiced. (Prerequisites: ELTN 1442) (2 hr lec/2 hrs lab/0 hrs OJT)
Subject: ELTN
Course Number: 2442
Automation Controllers In this course, the student will learn the basics of industrial automation controllers. The student will learn the fundamentals of how these devices operate and how to program them to perform simple control functions. To do this the student will learn Ladder Logic programming using the Allen Bradley RSLogix software and interface simple I/O devices to the PLC. (Prerequisites: ELTN 1408, ELTN 1412) (2 hrs lec/2 hrs lab/0 hrs OJT)
Subject: INMG
Course Number: 1420
Design Application Concepts I This course covers the design and production of a complex assembly using manual and CNC machines. A team approach will be used to design and manufacture the product. Industrial and Engineering standards will be utilized in the design process. (Prerequisites: None) (1 hr lec/4 hrs lab/0 hrs OJT)
Subject: INMG
Course Number: 1422
Design Application Concepts II This course covers the design and production of a complex assembly using manual and CNC machines. Geometric Design and Tolerance (GD&T) principles will be incorporated into the design and inspection of the part. A team approach will be used to design and manufacture the assembly. Industrial and Engineering standards will be utilized in the design process. (Prerequisites: INMG1420) (1 hr lec/4 hrs lab/0 hrs OJT)
Subject: MTCC
Course Number: 1600
Engineering Materials This course covers heat-treating concepts, procedures and methods. Secondary operations like plating, anodizing and other coatings. Machinability, properties and identification methods of both ferrous and non-ferrous materials are also covered. (Prerequisites: None) (1 hr lec/0 hrs lab/0 hrs OJT)
Subject: WKSH
Course Number: 1618
Robotics This is a summer camp for youth ages 14-16 who want to assemble robots, using kits and onsite manufacturing tools and equipment.
Subject: WLDG
Course Number: 1590
Introduction to Robotic Welding This course will involve the introduction to basic robotic welding operations, and programming. This course will also look at the electrical systems, along with the fluid power components of robotic welding. The final component will be the maintenance, and daily operations of robotic welding. (Prerequisites: WLDG1560, CADE1468, ENGL0950 or ENGL0955 or READ0950 or READ0955, or equivalent, or 78 or higher on the reading comprehension portion of the CPT, and MATH0520) (1 hr lec/2 hrs lab/0 hrs OJT)
Subject: WLDG
Course Number: 2450
Welding Internship This course will offer students the opportunity to acquire practical work experience ulitizing a variety of welding processes. Students will be using the knowledge and skills gained in the classroom to complete tasks in an active production environment. Each student will have a customized internship plan developed with an industry partner. This course is intended for students who have completed their first year of the welding program and have maintained a 3.0 GPA.. (Prerequisites: Instructor Approval) (0 hrs lec/0 hr lab/9-27 hrs OJT)

Craig's Co-Workers